Body work page 2
Project done
Comments, Questions or
Problems with the links
Click here
Go to Home Page
Sand to bare metal
Use quality primer that matches the factory color or
your shade will come out off color.*****Tip********
I was told by a old timer long ago to groung the part
your painting. I used a 45lbs. metal plate or you can
run a wire from the hood into the ground to stop dust
from jumping stacitly into your finish.
See the red wire----------->
I applied 3 thin coats wet sanding
between coats. You need to be patient to
let them dry completely or you just
waisted your time.  The same goes with
the base coats on the primary color and
clear coat.